The below stated dimensions and ratings are representative of Textainer's latest specifications. Individual container dimensions, ratings and specification details can be found by visiting our Equipment Status page.

Ratings	20' Standard	40' Standard	40' HC Standard
Maximum Gross Weight	30,480 kg (67,200 lb.)	32,500 kg (71,650 lb.)	32,500 kg (71,650 lb.)
Tare Weight	2,200 kg ( 4,850 lb.)	3,700 kg ( 8,168 lb.)	3,890 kg ( 8,587 lb.)
Payload	28,280 kg (62,350 lb.)	28,800 kg (63,482 lb.)	28,610 kg (63,063 lb.)
External Dimensions
Length	6,058 mm (19'-10½")	12,192 mm (40'-0")	12,192 mm (40'-0")
Width	2,438 mm (8'-0")	2,438 mm (8'-0")	2,438 mm (8'-0")
Height	2,591 mm (8'-6")	2,591 mm (8'-6")	2,896 mm (9'-6")
Internal Dimensions
Length	5,900 mm (19'-4¼")	12,025 mm (39'-5½")	12,025 mm (39'-5½")
Width	2,348 mm (7'-8½")	2,348 mm (7'-8½")	2,348 mm (7'-8½")
Height	2,385 mm (7'-9 7/8")	2,385 mm (7'-9 7/8")	2,690 mm (8'-9 7/8")
Door Opening
Width	2,340 mm (7'-8 1/8")	2,340 mm (7'-8 1/8")	2,340 mm (7'-8 1/8")
Height	2,275 mm (7'-5 5/8")	2,275 mm (7'-5 5/8")	2,578 mm (8'-5½")
Cube
Cube Capacity	33.04 m³ (1,166 ft.³)	67.34 m³ (2,377 ft.³)	75.95 m³ (2,681 ft.³)
Test Loads
Stacking	97,200 kg (214,290 lb.)	97,200 kg (214,290 lb.)	97,200 kg (214,290 lb.)
Transverse Racking	15,240 kg ( 33,600 lb.)	15,240 kg ( 33,600 lb.)	15,240 kg ( 33,600 lb.)
Longitudinal Racking	7,620 kg ( 16,800 lb.)	7,620 kg ( 16,800 lb.)	7,620 kg ( 16,800 lb.)
Floor Strength	7,260 kg ( 16,000 lb.)	7,260 kg ( 16,000 lb.)	7,260 kg ( 16,000 lb.)
Features Built to uniformly high quality, Corten steel specification. One of the lowest repair costs per on-hire day in the industry. Continuous new building program in main demand locations. 30-ton rated 20' containers and 32-ton rated 40' containers available for high payload with no tare weight penalty. Upgraded stacking capabilities, 8 high at 30 tons and 10 high at 24 tons, for more flexibilty in vessel stowage at no tare weight penalty. Fully corrugated side panels are less prone to damage. Recessed front and rear sills reduce damage and require less maintenance. High-grade exterior and interior paint systems with extended warranty on coatings. Interior coat specifications minimize reaction with cargo. FDA approved. Modified floor design without exposed center rail for a full width wood floor. Standard 19-ply floor minimizes delamination and adds strength. Textainer employees provide extensive on-line quality control at manufacturers. Young fleet. Older equipment retired from service on a rigorous basis.

The below stated dimensions and ratings are representative of Textainer's "typical" specifications. Individual container dimensions, ratings and specification details can be found by visiting our Equipment Status page.

Ratings¹	20' Flatrack	40' Flatrack
Maximum Gross Weight	34,000 kg (74,950 lb.)	45,000 kg (99,207 lb.)
Tare Weight	2,740 kg (6,040 lb.)	4,795 kg (10,570 lb.)
Payload	31,260 kg (68,860 lb.)	40,205 kg (88,627 lb.)
Concentrated load over center 2 metre	20,000 kg (44,090 lb.)	25,400 kg (55,997 lb.)
External Dimensions²
Length	6,058 mm (19'-10½")	12,192 mm (40'-0")
Width	2,438 mm (8'-0")	2,438 mm (8'-0")
Height	2,591 mm (8'-6")	2,591 mm (8'-6")
(Folded) Height	370 mm (14½")	641 mm (25¼")
Internal Dimensions
Length	5,613 mm (18'-4 15/16")	11,762 mm (38'-7 1/16")
Width	2,218 mm (7'-3 3/8")	2,378 mm (7'-9 5/8")
Height	2,213 mm (7'-3 1/8")	1,960 mm (6'-5 3/16")
Test Loads
Stacking	86,400 kg (190,447 lb.)	86,400 kg (190,447 lb.)
Transverse Racking	15,240 kg (33,600 lb.)	15,240 kg (33,600 lb.)
Longitudinal Racking	7,620 kg (16,800 lb.)	7,620 kg (16,800 lb.)
Floor Strength	7,260 kg (16,000 lb.)	7,260 kg (16,000 lb.)
Lashing Points	5,000 kg (11,025 lb.)	5,000 kg (11,025 lb.)
¹Seven empty units can be stacked into a 20' X 8'-6" module ²Four empty units can be stacked into a 40' X 8'-6" module
Features Full width front walls and folding front frames are easy to fold (use as platform or conveniently stack for storage and transportation). Equiped with fork pockets. Hinge design allows for worldwide standardization and parts availability. Stainless steel end locking pins have easily accessible lubrication points to reduce maintenance costs. Lashing points installed along the length of the main rails and throughout the for secure lashing of cargo at multiple points. Solid wood floor planks, augmented by a steel deck plate, minimize floor damage by fork lifts. End sill recess design prevents damage from twist locks.

The below stated dimensions and ratings are representative of Textainer's "typical" specifications. Individual container dimensions, ratings and specification details can be found by visiting our Equipment Status page.

Ratings	20' Opentop	40' Opentop
Maximum Gross Weight	30,480 kg (67,200 lb.)	30,480 kg (67,200 lb.)
Tare Weight	2,260 kg (4,982 lb.)	3,980 kg (8,774 lb.)
Payload	28,220 kg (62,218 lb.)	26,500 kg (58,426 lb.)
External Dimensions
Length	6,058 mm (19'-10½")	12,192 mm (40'-0")
Width	2,438 mm (8'-0")	2,438 mm (8'-0")
Height	2,591 mm (8'-6")	2,591 mm (8'-6")
Internal Dimensions
Length	5,899 mm (19'-4¼")	12,024 mm (39'-5 3/8")
Top Aperture Length	5,787 mm (18'-11 13/16")	11,809 mm (38'-8 15/16")
Width	2,352 mm (7'-8 19/32")	2,350 mm (7'-8 9/16")
Top Apeture Width	2,250 mm (7'-4 5/8")	2,230 mm (7'-3 7/8")
Height	2,351 mm (7'-8½")	2,351 mm (7'-8½")
Door Opening
Width	2,340 mm (7'-8 1/8")	2,338 mm (7'-8")
Height	2,295 mm (7'-5 7/8")	2,279 mm (7'-5¾")
Cube
Cubic Capacity	32.2 m³ (1,137 ft.³)	67.0 m³ (2,366 ft.³)
Test Loads
Stacking	97,200 kg (214,290 lb.)	97,200 kg (214,290 lb.)
Transverse Racking	15,240 kg (33,600 lb.)	15,240 kg (33,600 lb.)
Longitudinal Racking	7,620 kg (16,800 lb.)	7,620 kg (16,800 lb.)
Floor Strength	7,260 kg (16,000 lb.)	7,260 kg (16,000 lb.)
Features Built to uniformly high quality, Corten steel specification. 19-ply hardwood plywood floor with recessed flat bar center rail secured with 8mm zinc plated floor screws. Rear header is hinged and removable at both ends. Door hardware is Bloxwich B.E. 2566 bolted on, hot dipped galvanized. 34mm diameter tubular hot dipped galvanized roof bows. Swinging roof bows available on request. Polyester "DTEX" fabric coated PVC (650 g/m2) tarpaulin, with aluminum (aluzinc) eyelets. 3mm diameter steel core cable with 8mm diameter clear PVC sheathing. Cargo securing devices have 10mm diameter lashing rings on each top and bottom rail. Each front and rear corner post is fitted with two 12mm diameter lashing bars. Zinc rich primer, high build vinyl exterior and interior top coat and Tectyl 121B undercoat.

The below stated dimensions and ratings are representative of Textainer's "typical" specifications. Individual container dimensions, ratings and specification details can be found by visiting our Equipment Status page.

Ratings	Reefer
Maximum Gross Weight	34,400 kg (74,957 lb.)
Tare Weight incl. reefer unit (535 kg)	4,600 kg (10,141 lb.)
Max. Payload	29,400 kg (64,816 lb.)
Stacking Test Load	102,375 kg (225,698 lb.)
Heat Leakage, U-Value	Max. 35 kcal/h°C
Air Leakage	3.5m/h(at 25.4 mm H20)
Internal Cubic Capacity	67.5m³
External Dimensions
Length	12,192 mm (40'-0")
Width	2,438 mm (8'-0")
Height	2,896 mm (9'-6 0/10")
Internal Dimensions
Length	11,585 mm (380'-0 1/10")
Width	2,290 mm (7'-6 2/10")
Height	2,545 mm (8'-4 2/10")
Door Opening
Width	2,290 mm (7'-6 2/10")
Height	2,557 mm (8' - 4 7/10")
Cargo Access Height	2,510 mm (8' - 2 8/10")
External Cladding
Side	MGSS 0.8/1/2 mm
Roof	MGSS 0.8 mm
Base	MGSS 0.8 mm
Door	MGSS 1.6 mm
Internal Cladding
Side	HGSS 0.7 mm
Roof	P.P white AI. 0.8 mm
Base	63.5 mm high AI. T-floor
Door	HGSS 0.7 mm
Frames
Front Corner Posts	Outer: Corten 6.0 mm; Inner Corten 2.0 mm
Rear Corner Posts	Outer: Corten 6.0 mm; Inner Corten 8.0 mm
End Rails	Corten 4.0 mm
Side Top Rail	Corten 4.0 mm
Side Bottom Rail	Corten 4.0 mm/3.0 mm
Features Inside pre-treatment system with flame cleaning + Corona + auto glue spray = documented, superior foam adhesion. Hot spray zinc galvanizing of Corten rails, frames and understructure is a key to a long lasting corrosion protection. Two-step paint process, separate for sub- and main assembly, ensures corrosion protection in hidden areas of the frames. Semi-automated paint line ensures even, accurate application.